Corrosion Inhibition Of Steel Research Articles

An electrochemical, and surface studies of synthesized Gemini ionic liquid as corrosion inhibitor for carbon steel in petroleum field

In this work, we study the efficiency of N1, N3-dibenzyl-N1, N1, N3, N3-tetramethylpropane-1,3-diaminium chloride, as anticorrosion. This compound exhibits potential as a prospective remedy to stop the deterioration of carbon steel caused by corrosion in 1.0 M HCl. The synthesis of this compound is described in a comprehensive manner, and its composition is supported by a range of precise analytical approaches such as elemental analysis, and mass spectroscopy. Based on the findings of the investigation, the synthesized Gemini ionic liquid demonstrates a robust capacity to slow down the rate at which the metal corrodes. The Prepared compound was evaluation by electrochemical and morphology study. Our results revealed that elevating the inhibitor concentration led to an augmentation in inhibition effectiveness, reaching up to 94.8% at 200 ppm of the synthesized compound at 298 K. It is crucial to emphasize that the recently prepared Gemini ionic liquid is consistent with the Langmuir adsorption model and function as a mixed inhibitor, participating in the physio-chemisorption process of adsorption.

Corrosion Inhibition Performance of Brachystegia eurycoma Leaf Extract on Mild Steel in Acid Media

The aim of this work is to investigate the corrosion inhibition of B. eurycoma leaves extract as a natural inhibitor for mild steel corrosion in 3 M H2SO4 solution. The corrosion inhibitory activity was analyzed by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization. The surface roughness and its properties through scanning electron microscopy (SEM). The obtained result from EIS divulges that the gradual increase in inhibitor concentration and time of immersion leads to progressive increase in inhibition efficiency. At the end of 8 hours immersion time and inhibitor concentration of 1000 mg/l the highest inhibition efficiency of (88%) was obtained. The potentiodynamic polarization results indicated that addition of B. eurycoma leaves extracts hindered the reaction rates of anodic and cathodic reactions thereby performing as mixed- type inhibitor. The corrosion current density also revealed that in the presence of B. eurycoma leaves extracts the value of corrosion density reduced considerably from 265.2 \(\mu\) A/cm2 for sample without inhibitor to 67.8 \(\mu\) A/cm2 for sample with inhibitor. Again, it was observed that in the presence B. eurycoma leaves extracts the mechanism of hydrogen (effervescence) evolution was unique whereas the anodic dissolution of iron mechanism experienced the impact of the inhibitor. SEM inspection revealed that the mild steel surface showed smoother and lower damage in the presence of inhibitor. Obvious correlations were found between corrosion inhibition efficiency and some quantum chemical parameters such as energy of highest occupied molecular orbital (EHOMO), energy of lowest unoccupied molecular orbital (ELUMO), energy gap (EL–H) and electronic density etc. The obtained results were further elucidated with frontier molecular orbital theory.

Synthesis, scale and corrosion inhibition evaluation and mechanism of 2-aminobenzimidazole modified polyaspartic acid

With the growing public concern for environmental preservation, this work employs environmentally friendly polyaspartic acid (PASP) as the main chain, to develop a green and efficient dual-function inhibitor with scale and corrosion inhibition. The new inhibitor PASP-2-A was synthesized by grafting 2-amino-benzimidazole (2-A) containing nitrogen heterocyclic into polysuccinimide under alkaline conditions. The corrosion inhibition of carbon steel and brass was determined by static test, polarization curve and electrochemical impedance spectroscopy (EIS). It can be found that PASP-2-A had better scale inhibition performance than PASP under different conditions. The addition of 5 mg·L−1 PASP-2-A can almost 100% prevent the formation of CaCO3 scale. Molecular dynamics simulation results showed that PASP-2-A significantly destroys the crystal structure of CaCO3 scale due to the coordination between PASP-2-A and Ca2+ groups. The modified PASP scale inhibitor can prevent the growth of calcite (110) and (104) crystal faces, regulate the transformation of CaCO3 from stable calcite to more soluble spherical vaterite, making it less deposit. The electrochemical test results showed that the corrosion inhibition of PASP-2-A is greatly improved compared with PASP, and the corrosion inhibition of Q235 carbon steel increased about 40% at the dosage of 200 ppm. The corrosion inhibition efficiency of H62 brass in 3.5 wt% NaCl was 97.97% with 300 ppm PASP-2-A. Notably, due to its degradable nature, low toxicity, and affordability, PASP-2-A serves as an excellent inhibitor, exhibiting remarkable performance in both scale inhibition and corrosion inhibition. Consequently, it presents a promising avenue for further advancements in modified PASP.

Synthesis and characterization of selenium-polyvinyl alcohol nanoparticles as eco-friendly corrosion inhibitor for carbon steel in 1.0 M H2SO4

Selenium nanoparticles capped with polyvinyl alcohol (Se-PVA NPs) have been synthesized by chemical reduction using ascorbic acid as a reducing agent. The synthesized nanoparticles were characterized using XRD, DLS, zeta potential, FT-IR, and TEM analysis and found to be stable. The solution of Se-PVA NPs was used as a carbon steel corrosion inhibitor in 1.0 M H2SO4. The effect of the presence of Se-PVA NPs in the corrosion medium was studied by potentiodynamic polarization and gravimetric analyses In the presence of Se-PVA NPs with a concentration of 600 ppm at 303 K, corrosion inhibition efficiency values of 92.86 % and 92.3 % were recorded by potentiodynamic polarization and gravimetric analysis methods, respectively. Over the Se-PVA NPs concentration range 100–600 ppm, it was found that increasing the concentration increases the inhibition efficiency, while the temperature has an adverse effect, inhibition efficiency values of 80.0 % was recorded at 323 K for the 600 ppm Se-PVA NPs solution. The potentiodynamic polarization measurements suggested that Se-PVA NPs work as a mixed-type inhibitor. The corrosion inhibition process was confirmed by testing the used specimens’ metal surface using SEM and AFM techniques, which showed that the acidic medium’s negative impact (distortion and roughness) on the carbon steel surface was reduced significantly in the presence of Se-PVA NPs. The inhibitor’s adsorption on the metal surface was studied. It obeys the Langmuir isotherm with a mixed-type adsorption process. The related kinetic and thermodynamic parameters were investigated.

In-situ biosynthesized plant exudate gums‑silver nanocomposites as corrosion inhibitors for mild steel in hydrochloric acid medium

Natural gums due to availability, multifunctionality, and nontoxicity are multifaceted in application. In corrosion inhibition applications, their performance, in unmodified form is unsatisfactory because of high hydration rate, solubility issues, algal and microbial contamination, as well as thermal instability. This work attempts to enhance the inhibitive performance of Berlinia grandiflora (BEG) and cashew (CEG) exudate gums through various modification approaches. The potential of biogenic BEG and CEG gums−silver (Ag) nanocomposites (NCPs) for corrosion inhibition of mild steel in 1 M HCl is studied. The nanocomposites were characterized using the FTIR, UV–vis, and TEM techniques. The corrosion studies through the gravimetric and electrochemical (PDP, EIS, LPR, and EFM) analyses reveal moderate inhibition performance by the nanocomposites. Furthermore, the PDP results reveal that both inhibitors are mixed-type with maximum corrosion inhibition efficiencies (IEs) of 61.2 % and 54.2 % for BEG-Ag NCP and CEG-Ag NCP, respectively at an optimum concentration of 1.0 %. Modification of these inhibitors with iodide ion (KI) significantly increased the IE values to 90.1 % and 88.5 % for BEG-Ag NCP and CEG-Ag NCP at the same concentration. Surface observation of the uninhibited and inhibited steel samples using SEM/EDAX, 3D Surface profilometer, and AFM affirm that the modified nanocomposites are highly effective.

Influence of metal ions on cysteine as a corrosion inhibitor for low carbon steel in sulfuric acid: Polarization, EIS, XPS, and DFT analysis

This study examines the effectiveness of cysteine as an eco-friendly in inhibiting the corrosion of low-carbon steel in a sulfuric acid solution and the impact of adding various metal ions (Cu2+, Ni2+, and Co2+) to the media. All solutions were prepared using distilled water. The results show that 5 mM cysteine inhibits corrosion (IE = 65%), increasing to 93.5% in the presence of 4×10-5 M Cu2+ ions, but decreasing with the addition of Co2+ or Ni2+ ions. The inhibitive action of cysteine-Cu is the best one and that may be attributed to the formation of a protective coating on the metal surface, which prevents chemical reactions in an aggressive environment. Moreover, the DFT calculation found that the adsorption energy increased from −17.2 to −97.7 and −104.6 kcal/mol in the case of cysteine, Cysteine-Cu SAM, and Cysteine-Cu(II) Salt and the closest atom to the surface reduced from 2.576 to 2.128 and 2.146 Å which indicates Cysteine-Cu better adhere to the surface. SEM, XRD, and XPS were used to analyze the formation of the protective layer. This has the potential to develop new and more effective corrosion inhibitors for industrial applications.

Grape Leaves and Ziziphus Spina-Christi, Extracts as a Green Inhibitors Corrosion for The Carbon Steel and Oil Pipelines in 1M H2SO4

Metals suffer from corrosion by the surrounding fluids, which causes great economic losses and bad environmental effects, especially in oil pipelines or reservoirs. The extract of grape leaves (GL) and Sidr leaves, (Ziziphus spina-christi), (Zizi) were used as green corrosion inhibitors (CI) for carbon steel (CS), and Oil Pipelines in 1M H2SO4, these extracts showed varying capabilities in resisting corrosion. Corrosion rate was decreased with increase in inhibitor dose which could be due to enhanced surface coverage, as well as the effect of increasing the temperature on the percentage of the efficiency of inhibition, are decrease, and drawing the curves for that, as well as studying some physical properties related to the process of adsorption of extracts on the surface of (CS), such as the activation energy and entropy of the process of adsorption of the extracts on the surface of (CS), and calculating those values, and the extracts showed an efficiency that exceeded 90% at concentrations up to 400 ppm and a temperature of 313-343K. The activation energy associated with this process indicated surface interaction as the main mechanism and positive values of enthalpy change confirmed the endothermic nature. The potentiometric method showed the extent of voltage change with time for each concentration of extract of grape leaves for immersion time (2–24 h), and that the voltage increases with increasing concentration, which indicates a high ability of the inhibitor to adsorb to the metal..

Microwave-assisted fast preparation of functionalized carbon dots: The impact of ionic liquid precursor on corrosion inhibition

In this study, functionalized carbon dots were synthesized in one step from L-histidine and imidazolyl ionic liquids using an ionic liquid-assisted microwave method as green corrosion inhibitors for steel in a 1 M HCl solution. Different ionic liquid anions (CF3COO- and HSO4-) were introduced in the preparation of the carbon dots, and their microstructures and surface properties were characterized. Notably, the corrosion inhibition efficiency of the prepared CDs (assisted by CF3COO-) reached 94.2% at 5 mg‧dm−3. The corrosion inhibition behavior of CDs on mild steel in 1 M HCl was investigated through DFT calculations. Our investigation revealed that the anions of the selected ionic liquids have a certain influence on the structure of the carbon dots, which correlates with the performance of the carbon dot corrosion inhibitor. Therefore, this study provides guidance for the preparation of functionalized carbon dot corrosion inhibitors using a one-step microwave method and the selection of ionic liquids (as solvents, modifiers, and mediums for microwave conversion).

Synthesis and characterization of a new eco-friendly dopamine derivative schiff base as an effective corrosion inhibitor for mild steel in acidic environment

The natural corrosion inhibitor behaviour of a newly synthesized dopamine derivative Schiff base (4-DBAB) has been inspected on mild steel in aggressive 1 M HCl using linear polarization, electrochemical impedance spectroscopy and potentiodynamic polarization techniques. The Schiff base was synthesized by eco-friendly pathway. Characterization of the synthesized new non-toxic inhibitor was performed using FT-IR and 1H-NMR spectroscopy techniques. The anti-corrosive efficiencies at optimum concentration of 4-DBAB inhibitor was 87.4% after 1 h and 98.4% after 120 h by impedance technique in acidic solution. The potential of zero charge of mild steel was also determined to elucidate the inhibition mechanism in the presence of the highest 4-DBAB solution. The atomic force microscopy and field emission scanning electron microscopy researches performed on surface morphology to provide additional support on the interaction between the mild steel surface and 4-DBAB molecules. Adsorption behaviour of the inhibitor was also studied at different durations by experimental inhibition results and showed the Langmuir isotherm involving chemisorption. Highlights A new dopamine-derived Schiff base (4-DBAB) with natural and environmentally friendly corrosion inhibition properties was synthesized. (Synthesis of eco-friendly compound). 4-DBAB demonstrated a high anti-corrosive efficiency after 120 hours in aggressive 1M HCl, as determined by impedance technique. (Exceptional corrosion inhibition). The determination of the potential of zero charge of mild steel provided insights into the inhibition mechanism in the presence of the highest 4-DBAB solution. (Mechanism elucidation). AFM and FE-SEM studies on surface morphology supported the interaction between the mild steel and 4-DBAB molecules, affirming its corrosion inhibition properties. (Surface interaction analysis).

Synthesis and characterization of bis-isoxazoline-thiosemicarbazone as a corrosion inhibitor for carbon steel: Experimental study, and molecular simulation

In this study, a novel compound, bis-isoxazoline-thiosemicarbazone (BIT), was synthesized and tested for its ability to protect carbon steel from corrosion in a 1 M HCl solution. The compound's structure was confirmed using spectroscopic techniques such as 1H NMR, 13C NMR, and HRMS. Various methods, including mass loss analysis, potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS), SEM, and EDX, were employed to assess BIT's effectiveness in inhibiting corrosion and its adsorption behavior on carbon steel in acidic conditions. The findings demonstrated the high effectiveness of BIT as a corrosion inhibitor, with a 95 % inhibition rate observed at a concentration of 0.77 mM and a temperature of 298°K. Analysis through PDP revealed that BIT operates as a mixed-type inhibitor, conforming to the Langmuir adsorption isotherm during its attachment to the carbon steel surface, indicating a mixed (chemical-physical) adsorption process.SEM-EDX analysis demonstrated even distribution of the inhibitor on the steel surface. Notably, BIT contains several functional groups (methoxy, carbonyl, isoxazolyl,..) and heteroatoms (N, O, and S) that play a crucial role, as supported by Density Functional Theory (DFT) studies. Experimental findings were validated by DFT and molecular dynamics (MD) simulation data.

Exploring the Efficacy of Novel Thiohydantoin Derivatives with Arylacetamide Core as Corrosion Inhibitors for Mild Steel in Acidic Medium: Insights from Electrochemical Analysis, Comprehensive Characterization, and Quantum Studies

Two new compounds of Thiohydantoin Derivatives N-(4-nitrophenyl)-2-((5-oxo-4,4-diphenyl-4,5-dihydro-1H-imidazole-2-yl)thio) acetamide and N-(4-fluorophenyl)-2-((5-oxo-4,4-diphenyl-4,5-dihydro-1H-imidazole-2-yl)thio) acetamide symbolized by N-NOITAcetamide and N-FOITAcetamide respectively, were synthesized and characterized by NMR spectroscopy. Their effectiveness in inhibiting mild steel (M-S) corrosion in 1.0 M HCl at 298 K was investigated by potentiodynamic polarisation (PDP), electrochemical impedance spectroscopy (EIS), electrochemical frequency modulation (EFM), and surface examinations via energy dispersive spectroscopy (EDS), and scanning electron microscopy (SEM) as well as X-ray photoelectron spectroscopy (XPS). Experimental results have been supported by theoretical studies such as Density Functional Theory (DFT) calculations and Monte Carlo (MC) simulation studies. All findings indicate that inhibitors have a considerable impact on lowering the rate of corrosion, and that the efficiency of the inhibitors rises with the concentration of the inhibitor. Experimental results revealed that the efficacy of the new thiohydantoin derivatives with an arylacetamide nucleus increased with increasing inhibitor concentration, where their inhibition efficiencies reached maximum values of 92.1%, 94.1%, for N-NOITAcetamide and N-FOITAcetamide, at 10−3M, respectively. In addition, the icorr decreased with increasing concentration up to 85 µA cm−2 and 58 for N-NOITAcetamide and N-FOITAcetamide respectively, with a blank as a reference of 1045 µA cm−2, while the efficacy reduces as the temperature increases. The activation and thermodynamic parameters indicated that these products act via chemical adsorption on the mild steel surface. Furthermore, the surface analysis (SEM, EDS, and XPS) confirmed the formation of a protective layer adsorbed on the mild steel surface. Polarization curves indicated that N-NOITAcetamide and N-FOITAcetamide are mixed-type inhibitors. Moreover, the quantum chemical calculation well supports the experimental results.

Celastrus paniculatus seeds as a green corrosion inhibitor for stainless steel in H2SO4 Acidic solution

Celastrus paniculatus seeds as a green corrosion inhibitor for stainless steel in H2SO4 Acidic solution

Influence of cashew nut shell liquid on corrosion and tribocorrosion behavior of metallic alloys

Cashew Nut Shell Liquid (CNSL) has been explored in several applications within the sustainability principles and circular economy of agro-industrial product waste. To understand the anticorrosive and lubricant properties of CNSL solutions, a multi-faceted approach, incorporating electrochemical analyses, immersion test, tribological measurements, and tribochemical characterization was carried out for mild steel AISI 1012, stainless steel AISI 420 and Aluminium Alloy 6061. Electrochemical analyses reveal a positive impact of CNSL, inducing a shift in corrosion potential to more positive values and a decrease in corrosion current, indicating effective corrosion inhibition for stainless steel and aluminium alloy. In mild steel, CNSL exhibits a mixed-type inhibition with efficiency increasing in correlation with oil concentration. The lubricating properties of CNSL are evident according to the coefficients of friction (COF) obtained and the elastohydrodynamic lubrication regime observed during tribological tests. Tribochemical tests demonstrate a reduction in wear and an improvement in tribocorrosion behavior under sliding conditions. CNSL emerges as a promising tribocorrosion mitigator, demonstrating multifaceted benefits. The concentration-dependent effects highlight the need for optimization in specific applications, particularly for passive materials. CNSL not only inhibits corrosion through film formation but also provides effective lubrication, reducing friction, wear, and chemical-mechanical degradation. This research contributes valuable insights to corrosion science. It proposes practical applications for CNSL in diverse industrial contexts, showcasing its potential as an environmentally friendly and sustainable solution for tribocorrosion challenges.

Corrosion inhibition of acid pickling –descaling-cleaning action on mild steel using aqueous hydroxyethyl cellulose

The corrosion inhibition capability of aqueous Hydroxyethyl cellulose (HEC) on mild steel corrosion in 1 M HCl solution proposed for mild steel pickling, industrial cleaning, and descaling was evaluated at different concentrations and immersion times using gravimetric measurement. HEC demonstrated efficiency in mild steel corrosion inhibition with a maximum inhibition efficiency of 87% for a 300 ml acid pickling, industrial cleaning, and descaling solution composed of 20% aqueous solution of 0.01 M HEC and 80% of 1 M HCl solution, within an immersion time of 120 hours. The inhibition efficiency was found to increase with the increase in the concentration of HEC implying that HEC’s inhibition action is concentration and time-dependent. The mechanism of adsorption of HEC was identified to be chemisorption with hydroxyl (-OH) moiety donated to the active sites of mild steel coupled with HEC molecules encapsulation of chloride ions on mild steel surface thus preventing the corrosive action of Cl ions on the mild steel.

Synthesis and Performance of a New and Simple Schiff Base Structure for Corrosion Inhibition of C38 steel in 1 M HCl Solution: Experimental Studies and DFT Investigation

In order to investigate the corrosion of carbon steel (C38) in acidic media, experimental studies (weight loss measurements, electrochemical methods, thermodynamic adsorption isotherms and field emission scanning electron microscopy coupled with energy dispersive X-ray) and computational approach were adopted to study the newly synthesized and simple Schiff base structure, namely 4-((phenylimino)methyl) phenol (PIMP) as a corrosion inhibitor for C38 steel in 1M HCl. Characterization techniques (Fourier Transform Infrared spectroscopy, mass spectrometry, proton nuclear magnetic resonance) showed that PIMP was successfully synthesized with a yield of 63%. Experimental methods (weight loss, open circuit potential (OCP), electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (PDP)) showed that PIMP is a mixed-type inhibitor with an inhibition percentage of 91.1% under optimal conditions (7.5 mM PIMP at 30°C). These experimental results were supported by surface analysis (Field Emission Scanning Electron Microscopy (FESEM) coupled with Energy Dispersive X-Ray (EDX)), where PIMP molecules are adsorbed on the steel surface and form a protective barrier against aggressive ions, thereby limiting steel oxidation. The adsorption of PIMP on the carbon steel surface followed the Langmuir adsorption isotherm along with a mixture of physical and chemical adsorption, forming a complete and dense protective film on the C38 steel surface. Theoretical results using density functional theory (DFT) calculations showed that PIMP contains highly reactive centers and confirmed the experimental results obtained.

Electrochemical and Quantum Chemical Investigations of novel pyrazole derivatives as a Corrosion Inhibitor for Stainless Steel in 2M H2SO4 medium

Stainless steels play a crucial role in diverse industrial domains. However, due to their exposure to acidic environments, stainless steels undergo the corrosion phenomenon, leading to the deterioration of the material and its properties. Thus, the objective of this work is to study the corrosion inhibition of stainless steel in an H2SO4 2M medium by using two organic compounds, namely Py-3:{1-amino-5,10-dioxo-3-(p-tolyl)-5,10-dihydro-1H-pyrazolo[1,2-b] phthalazine-2-carbonitrile} and Py-4:{1-amino-3-(2-chlorophenyl)-5,10-dioxo-5,10-dihydro-1H-pyrazolo[1,2-b]phthalazine-2carbonitrile}. This study was conducted using transient electrochemical methods in conjunction with a theoretical approach. The obtained results demonstrate that the addition of pyrazole compounds in the corrosive medium H2SO4 exhibits excellent inhibitory power against steel corrosion, with an inhibitory efficiency reaching 98%. The tested inhibitors are adsorbed into the surface of the metal by chemical bonds, Moreover, the adsorption of these compounds follows the Langmuir adsorption model. Theoretical calculations based on the Density Functional Theory (DFT) provide a better understanding of the reactivity of tested inhibitor towards stainless steel which they are in good agreement with the experimental findings.

Isoindigo derivatives as some potential corrosion inhibitors for mild steel in hydrochloric acid solution: Synthesis, experimental and theoretical studies

This investigation synthesized two isoindigo derivatives (IIDBr-NBr and IIDBr-MBr). These derivatives were then applied as green corrosion inhibitors for mild steel in a 1 mol L−1 HCl aqueous solution. The study investigated the corrosion inhibition performance of IIDBr-NBr and IIDBr-MBr through electrochemical and weight loss (WL) measurements, as well as surface analysis (SEM, AFM and XPS). The results showed that both IIDBr-NBr and IIDBr-MBr exhibited excellent corrosion inhibition performance (inhibition efficiency of 96.27 % for IIDBr-NBr and 96.46 % for IIDBr-MBr). Quantum chemical calculations based on density functional theory (DFT) and molecular dynamics (MD) were used to reveal the adsorption mechanisms of IIDBr-NBr and IIDBr-MBr at the steel/solution interface.

An investigation of modified dialdehyde starch as a highly efficient green corrosion inhibitor for carbon steel in 1 M HCl medium: Synthesis, experimental and theoretical studies

Compared to small organic molecule corrosion inhibitors, polymer corrosion inhibitors offer numerous advantages in terms of adsorption coverage on the metal surface and the presence of multiple active sites for adsorption. A dialdehyde starch Schiff base was synthesized by modification of natural polymer starch and tetraethylene pentaamine, and it was characterized by X-ray diffraction, gel chromatography and thermogravimetry. The corrosion inhibition behaviors of dialdehyde starch Schiff base as an oligomer for low carbon steel in 1 M HCl were investigated. Compared to the common starch derivatives, the dialdehyde starch Schiff base has good water solubility and inhibition performance. The inhibition efficiency can reach 93.2% with 0.16 mM in 1 M HCl solution at 333 K. Double aldehyde starch Schiff base is a mixed corrosion inhibitor that mainly inhibits cathodic reactions. Its adsorption on the surface of carbon steel follows the Langmuir adsorption equation, and the nitrogen -containing groups in the molecules are adsorbed on the surface of the steel through physical and chemical reactions. Quantum chemical calculations confirmed the experimental results.

Evaluating the efficacy of newly synthesized amino acid derivatives as corrosion inhibitors in acidic solutions

Three benzimidazole derivatives, with tryptophan (BIT), tyrosine (BIY), and histidine (BIH) amino acid units, have remarkable protective properties as eco-friendly corrosion inhibitors for steel under severe acidic conditions. At a temperature of 303 K, the corrosion inhibition efficiency of BIT, BIY, and BIH at a concentration of 10 mM is 90.09 %, 92.53 %, and 93.43 %, respectively. Electrochemical tests indicate that the adsorption of these substances on the substrate leads to an increase in charge transfer resistance and interfacial electric double layer thickness. This effectively hinders the dissolution of metal and the evolution of hydrogen. The analysis of the surface structure and appearance using SEM-EDS indicates that the inhibitors have the ability to create a protective coating through both chemical and physical bonding, effectively protecting the metal from corrosive substances. Theoretical calculations, such as Density Functional Theory (DFT) and Natural Bond Orbital (NBO) analysis, along with FUKUI analysis, help identify active sites and adsorption configuration. This enhances our understanding of the corrosion mitigation mechanism. These findings align with the experimental conclusion that the formation of a stable protective film contributes to superior inhibition performance against acidic corrosion conditions.

Assessment of Azolla Microphylla Plant Extract as an Environmentally Benign Corrosion Inhibitor for Low-Carbon Steel in Acidic Media

Assessment of Azolla Microphylla Plant Extract as an Environmentally Benign Corrosion Inhibitor for Low-Carbon Steel in Acidic Media